Track Gearbox; Oil - jcb JS300 Service Manual

Oil

Check (Level)
1. Make the machine safe, with the fill/level and drain plugs in the positions shown.
Refer to: Maintenance > Maintenance Positions > Maintenance Position (Excavator Arm Lowered)
(Page 184).
A Fill\level plug
B Drain plug
2. Clean the area around the fill/level plug.
3. Remove the fill/level plug.
4. Make sure that the oil inside the gearbox is level with the fill/level plug.
5. If necessary, add the recommended oil through the fill/level plug hole.
Refer to: Technical Data > Fluids, Lubricants and Capacities (Page 262).
6. Clean the fill/level plug.
7. Install the fill/level plug. Tighten the fill/level plug to the correct torque value.
Refer to: Technical Data > Torque Values (Page 266).
8. Check the oil level on the other side. Repeat the steps 1 to 7.
220

Track Gearbox

Figure 234.
A
9831/1100-2
Maintenance
Track Gearbox
B
220