Fig 96.
E-213
X
C030710-C1
9813/5100-1
Section E - Hydraulics
Assembly of Piston Rod in Cylinder Tube
1
Make sure that assembly tools and cylinder tube are
clean before assembly. The piston rod pack must be
protected from dirt up until this stage. Assembly
should be made vertically.
Secure the cylinder tube
bring the end of the piston rod to the cylinder tube
opening.
Fig 97.
Release the end-flange cover on the cylinder tube in
order to let air out from the tube during assembly.
Make sure the piston rod head is turned in the right
position in relation to the bottom of the cylinder.
2
Before assembly, make sure that guiding slits on the
piston are not aligned
Hydraulic Rams
Dismantling and Assembly
K Fig 97. ( T E-213)
373740A-V1
K Fig 98. ( T
E-214).
E-213
and