jcb JS300 Service Manual page 794

X
Removal
!M
WARNING
Hydraulic Pressure
Hydraulic fluid at system pressure can injure you.
Before connecting or removing any hydraulic hose,
residual hydraulic pressure trapped in the service
hose line must be vented. Make sure the hose service
line has been vented before connecting or removing
hoses. Make sure the engine cannot be started while
the hoses are open.
INT-3-1-11_2
1 Make the machine safe, refer to Section E, Service
Procedures.
2 Disconnect all hydraulic hoses from the slew motor
and plug all orifices to prevent ingress of dirt. Label
each hose before disconnection.
E-133
Removal and Replacement
TE-027
Fig 4.
3
4
5
9813/5100-1
Section E - Hydraulics
Removal and Replacement
Make an alignment line across the gearbox and motor
mounting flanges, to provide a reference during
assembly.
Remove bolts X.
Using suitable lifting equipment carefully lift slew
motor until clear of machine, refer to Section E,
Technical Data.
Swing Motor
C078320
E-133