Operation Overview - jcb JS300 Service Manual

Fault Code Display
A fault codes will be displayed on the display monitor LCD.
For details about navigating the display screens refer to
Section 2.
The colour of the display will change according to the
severity of the fault displayed.
K Service/Operator Fault ( T C-209)
–
K Critical Fault ( T C-210)
–
Service/Operator Fault
The display is Amber, the buzzer will sound for 1 second,
an Icon representing area of machine affected and a fault
code is displayed. This indicates faults that may result in
reduced machine performance but are not dangerous.
They are unlikely to damage the machine. These are
known as 'SERVICE' or 'OPERATOR' faults. Warnings
remain active until the operator acknowledges the warning
with the info key.
If multiple fault codes are active the screen will alternate
between the active faults.
Fig 1. Service/Operator fault warning display
C-209

Operation Overview

C128810.jpg
9813/5100-1
Section C - Electrics
Fault Code System
Operation Overview
C-209