Return Filter - jcb JS300 Service Manual

Replace
1 Prepare the machine.
Maintenance, Maintenance Positions.
2 Release Tank Pressure. Refer to Section 2,
Maintenance, Hydraulic System.
3 Get access to the
Points ( T E-296)
Fig 6.
4 Remove the return filter as follows:
a Remove the cover A and O-ring B.
b Remove spring C, valve D and return filter E from
the tank.
E-301

Return Filter

Refer to Section 2,
K Service
return filter.
9813/5100-1
Section E - Hydraulics
Routine Maintenance Procedures
5 Install a new return filter E. Re-assemble in the
reverse order using a new cover O-ring B.
Return Filter
E-301