Auxiliary Circuit Controls - jcb JS300 Service Manual

2
D
1
D Pedal
E Ram
1 Heel end of the pedal: Extend the ram
2 Toe end of the pedal: Retract the ram

Auxiliary Circuit Controls

WARNING Before operating the auxiliary control system make sure that you are aware of all safety notices
that apply to the attachment you are using. Also make sure you have installed the attachment correctly and
have read its operator's manual.
General
The auxiliary controls are on the excavator arm controls.
Excavator Arm Controls (Page 96).
There is also an auxiliary control pedal option, push the pedal to operate a full flow auxiliary circuit. For more
information, refer to the operator manual supplied with the attachment.
A Auxiliary control pedal
Attachment Systems
Your machine may be equipped with one of four systems, for operating attachments requiring high flow or a
system for operating attachments requiring both standard and high flow. An optional low flow two-way circuit
is also available in addition to or as an alternative to the above.
104
Figure 134.
Refer to: Operation > Operating Levers/Pedals >
Figure 135.
9831/1100-2
Operation
Operating Levers/Pedals
1
E
A
2
104