Tank - jcb JS300 Service Manual

Refer to: Maintenance > Maintenance Positions (Page 184).
2. Get access to the engine compartment (if applicable).
Refer to: Maintenance > Access Apertures (Page 191).
3. Check the engine compartment (if applicable), fuel lines and the area below for leaks.
4. If necessary, contact your JCB dealer.

Tank

Clean
Draining Fuel Tank Impurities
1. Make the machine safe.
Refer to: Maintenance > Maintenance Positions > Maintenance Position (Excavator Arm Lowered)
(Page 184).
2. Remove the cover plate from below the fuel tank.
3. Put a suitable container below the self sealing drain plug.
4. Remove the outer threaded cover from the self sealing drain plug.
5. Connect the self sealing drain kit threaded union with attached pipe. Drain the water and deposits until
there is clean diesel.
6. Remove the self seal drain kit.
7. Clean and install the outer threaded cover. Do not over tighten the cover.
8. Install the cover plate.
A Self sealing drain kit
B Pipe
Clean the Filler Cap
1. Make the machine safe.
Refer to: Maintenance > Maintenance Positions > Maintenance Position (Excavator Arm Lowered)
(Page 184).
2. Get access to the fuel filler cap.
210
Figure 226.
A
B
9831/1100-2
Maintenance
Fuel System
210