Operator Protective Structure - jcb 411HT Operator's Manual

A Engine data label - rocker cover
C Stamp
The data label includes the engine identification number.
SJ
Digit 1-2
Digit 1-2
SJ
DJ
Digit
3-10
11
12-16
17-18
The country of manufacturer, engine serial number and year of manufacture of the engine are also stamped
on the crankcase. Refer to Figure 6.

Operator Protective Structure

ROPS and FOPS Data Plate
WARNING You could be killed or seriously injured if you operate a machine with a damaged or missing
ROPS/FOPS/FOGS. If the ROPS/FOPS/FOGS has been in an accident, do not use the machine until the
structure has been renewed. Modifications and repairs that are not approved by the manufacturer may be
dangerous and will invalidate the ROPS/FOPS/FOGS certification.
WARNING Do not use the machine if the falling objects protection level provided by the structure is not
sufficient for the application. Falling objects can cause serious injury.
WARNING Machines with a ROPS, FOPS,FOGS or TOPS are equipped with a seat belt. The ROPS,
FOPS,FOGS or TOPS is designed to give you protection in an accident. If you do not wear the seat belt you
11
A
Table 3. Example of the engine identification number
320/40001
3-10
Engine Type
4.4 L turbocharged and aftercooled electronic common rail fuel injection (Tier
4F)
4.8 L turbocharged and aftercooled electronic common rail fuel injection (Tier
4F)
Table 5. Explanation of the engine identification number
Explanation
Engine part number
Country of manufacture. U = United Kingdom
Engine serial number
Year of manufacture
Product and Component Identification
Figure 6.
B
C
C
B Engine identification number
U
11
Table 4.
9831/1850-4
About the Product
00001 04
12-16 17-18
11