Seat; Seat Belt - jcb JS300 Service Manual

1 Torque tightness is 874N·m
2 Torque tightness is 506N·m
3
Torque tightness is 506N·m
4
Torque tightness is 104N·mFOGS

Seat

Check (Condition)
Check that the seat adjustments operate correctly.
Check the seat is undamaged.
Check the seat mounting bolts are undamaged, correctly installed and tight.
Make sure the seat is clear from unwanted materials and hazards at all times.

Seat Belt

Check (Condition)
WARNING When a seat belt is installed on your machine replace it with a new one if it is damaged, if the
fabric is worn, or if the machine has been in an accident. Install a new seat belt every three years.
WARNING If the seat belt does not 'lock' when you check if the seat belt is operating correctly, do not drive
the machine. Get the seat belt repaired or replaced immediately.
Make sure the seat belt can be adjusted.
Examine the seat belt for signs of fraying and stretching.
Check that the stitching is not loose or damaged.
Check that the belt mounting bolts are undamaged, correctly installed and tight.
203
Figure 224. Frame Mounted ROPS (FOGS)
4
3
9831/1100-2
2
1
Maintenance
Operator Station
203