jcb JS300 Service Manual page 858

Fig 40.
2 Install the pin, bolts and nuts.
!M
WARNING
Metal Splinters
You can be injured by flying metal splinters when
driving metal pins in or out. Use a soft faced hammer
or copper pin to remove and fit metal pins. Always
wear safety glasses.
INT-3-1-3_2
E-197
803181-1
Note: When checking or refitting JS machine pivot pins,
the retaining nuts and bolts should not be fastened up tight
to the pivot boss but must have approximately 3mm of play
so that the pin is free from tension.
3 Install the grease tube and connect the hoses.
9813/5100-1
Section E - Hydraulics
Hydraulic Rams
Removal and Replacement
Fig 41.
Fig 42.
803201
A409820-C2
E-197