General
Check (Condition)
NOTICE Do not modify or fit non JCB approved components to the engine induction system, otherwise the
engine emissions will be compromised.
1. Make the machine safe.
Refer to: Maintenance > Maintenance Positions (Page 184).
2. Get access to induction system.
Refer to: Maintenance > Access Apertures (Page 191).
3. Check the system hoses for:
3.1. Condition.
3.2. Damage.
3.3. Security.
4. Replace the system hoses if necessary.
Pre-Cleaner
Clean
Refer to the pre-cleaner manufacturers instructions for specific maintenance/cleaning instructions.
Dust Valve
Check (Condition)
•
Check the dust valve for rips/tears.
•
Check there are no obstructions.
•
Check that the dust valve is free of dirt and dust.
•
Check that the dust valve securely attached to the air filter housing.
208
Air Filter
9831/1100-2
Maintenance
Air Filter
208