jcb JS300 Service Manual page 149

Press the rotary control again to display a list of the machine faults recorded. Turn the rotary control to switch
between screens 1 and 2. Press the back button to return.
The fault log screen is used to provide information on the active and previously active faults on the machine.
The fault log display screen displays the fault code, time, date, engine hours and number of times that the
fault has been active. By default, the fault log display shall only display active faults. It shall be possible to
view active and historical faults by going to the diagnostic menu. Faults shall be displayed in the colour of their
severity (critical = red, warning = yellow, trivial = gray).
GPS
Press the rotary control again to display the GPS position of the machine. Press the back button to return.
74
Figure 77.
Figure 78.
Figure 79.
9831/1100-2
Operation
Instruments
74