Dismantling - jcb JS300 Service Manual

as a guide to the dismantling and assembly procedures
refer to the sectional illustration,
1 Remove the bolt B and cover A.
2 Remove the 'O'-ring C.
Do not reuse the 'O'-ring C.
3 Remove bolts D and the thrust plate E.
4 Remove seal F.
A
C
D
F
Fig 5.
5 Using a jig push off the axle G from the rotor H.
Do not hit with a hammer.
E-174

Dismantling

K Fig 1. ( T
E-171).
B
E
716630-C1
9803/5100-1
Section E - Hydraulics
G
C031300-C1
Fig 6.
6 Remove the V-ring J and nylon ring K from the axle H.
Note: Do not reuse the V-ring J and nylon ring K.
Rotary Coupling
Dismantling
H
E-174