Installing The Wireless Siren - Thermo Scientific Smart-Vue Installation Manual

Installing the wireless siren

Smart-Vue Wireless Siren Installation Guide
9
1. For strong adhesion, wipe and dry the back of the siren and the wall
where you intend to place the unit.
2. Attach one side of the Velcro tape to the back of the siren and the
other on the wall where you intend to place the unit.
3. Place the siren on the wall using the Velcro.
4. Plug the DC adapter into the siren as shown below. The plug should
click firmly into the socket on the siren.
Align key with slot
Figure 3. Plugging in your Thermo Scientific wireless siren
Note: If you have to remove this plug from the siren, pull gently so you do
not damage the unit or plug.
Installation procedure
Thermo Fisher Scientific