Digi IX14 User Manual page 231

Hide thumbs Also See for IX14:

Table of Contents

User authentication

where value is any number of weeks, days, hours, minutes, or seconds, and takes the format

number{w|d|h|m|s}.

For example, to set idle_timeout to ten minutes, enter either 10m or 600s:

(config)> auth idle_timeout

4. Save the configuration and apply the change:

(config)> save

Configuration saved.

5. Type exit to exit the Admin CLI.

Depending on your device configuration, you may be presented with an Access selection

menu. Type quit to disconnect from the device.

IX14 User Guide

Set the idle timeout for IX14 users