Digi IX14 User Manual page 293

Hide thumbs Also See for IX14:

Table of Contents

System administration

1. Log into the IX14 WebUI as a user with Admin access.

2. On the main menu, click System. Under Configuration, click Configuration Maintenance.

The Configuration Maintenance windows is displayed.

3. In the Erase configuration section, click ERASE.

4. Click CONFIRM.

5. After resetting the device:

a. Connect to the IX14 by using the serial port or by using an Ethernet cable to connect the

IX14 LAN port to your PC.

b. Log into the IX14:

User name: Use the default user name: admin.

Password: Use the unique password printed on the bottom label of the device (or the

printed label included in the package).

If your device was manufactured prior to the release of firmware version 19.11.x, the

default user name may be root.

c. (Optional) Reset the default password for the admin account. See

password for the admin user

Command line

1. Log into the IX14 command line as a user with Admin access.

Depending on your device configuration, you may be presented with an Access selection

menu. Type admin to access the Admin CLI.

IX14 User Guide

Erase device configuration and reset to factory defaults

for further information.

Change the default