Digi IX14 User Manual page 117

Interfaces
3. Click Network > Interfaces.
4. Click the menu icon (...) next to the name of the WAN or WWAN to be deleted and select
Delete.
5. Click Apply to save the configuration and apply the change.

Command line
1. Log into the IX14 command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. Use the del command to delete the WAN or WWAN. For example, to delete a WWAN named
my_wwan:
(config)> del network interface my_wwan
4. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
IX14 User Guide
Wireless Wide Area Networks (WWANs)
117