Schedule Reboots Of Your Device - Digi IX14 User Manual

Hide thumbs Also See for IX14:

Table of Contents

System administration

1. Log into the IX14 WebUI as a user with Admin access.

2. From the main menu, click System.

3. Click Reboot.

4. Click Reboot to confirm that you want to reboot the device.

Command line

1. Log into the IX14 command line as a user with Admin access.

Depending on your device configuration, you may be presented with an Access selection

menu. Type admin to access the Admin CLI.

2. At the prompt, type:

Schedule reboots of your device

1. Log into the IX14 WebUI as a user with full Admin access rights.

2. On the menu, click System. Under Configuration, click Device Configuration.

The Configuration window is displayed.

IX14 User Guide

Reboot your IX14 device