Configure The Device As An Ntp Server - Digi IX14 User Manual

Services

Configure the device as an NTP server

Required Configuration Items
Enable the NTP service.
n
At least one upstream NTP server for synchronization. The default setting is the Digi NTP
n
server, time.devicecloud.com.
Additional Configuration Options
Additional upstream NTP servers.
n
Access control list to limit downstream access to the IX14 device's NTP service.
n
The time zone setting, if the default setting of UTC is not appropriate.
n
To configure the IX14 device's NTP service:

WebUI
1. Log into the IX14 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Services > NTP.
4. Enable the IX14 device's NTP service by clicking Enable.
5. (Optional) Configure the access control list to limit downstream access to the IX14 device's
NTP service.
To limit access to specified IPv4 addresses and networks:
n
a. Click IPv4 Addresses.
b. For Add Address, click .
IX14 User Guide
Network Time Protocol
411