Digi IX14 User Manual page 404

Services

Command line
1. Log into the IX14 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Use the show modbus-gateway
> show modbus-gateway
Server Connection
-----------------
modbus_socket
modbus_socket
Client
--------------------
modbus_socket_41
modbus_socket_21
modbus_serial_client
>
If the message Server connections not available is displayed, this indicates that there are no
connected clients.
3. Use the show modbus-gateway verbose
information:
> show modbus-gateway verbose
Client
--------------------
modbus_socket_41
modbus_socket_21
modbus_serial_client
Common Statistics
-----------------
Configuration Updates
Client Configuration Failure
Server Configuration Failure
Configuration Load Failure
Incoming Connections
Internal Error
Resource Shortages
Servers
-------
modbus_socket
-------------
IX14 User Guide
command at the system prompt:
IP Address Port
----------- -----
10.45.1.139 49570
10.45.1.139 49568
Uptime
------
0
0
428
command at the system prompt to display more
Uptime
------
0
0
506
: 1
: 0
: 0
: 0
: 4
: 0
: 0
Uptime
------
6
13
Modbus gateway
404