Show Status Of All Containers; Show Status Of A Specific Container - Digi IX14 User Manual

Containers

Command line

Show status of all containers

Use the show containers
on the system:
1. Log into the IX14 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the prompt, type:
> show containers
Container
---------
mytest1
test_lxc
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Show status of a specific container

Use the show containers container name
1. Log into the IX14 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the prompt, type:
> show containers container test_lxc
Container
---------
test_lxc
IX14 User Guide
command with no additional arguments to show the status of all containers
Configured Enabled
---------- -------
True enabled
True enabled
command to show the status of the specified container:
Configured Enabled
---------- -------
True enabled
View the status of containers
State
-----------------
STOPPED
RUNNING PID 19327
State
-----------------
RUNNING PID 19327
439