Configure Options For The Event And System Logs - Digi IX14 User Manual

Diagnostics
7. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Configure options for the event and system logs

The default configuration for event and system logging is:
The heartbeat interval, which determines the amount of time to wait before sending a
n
heartbeat event if no other events have been sent, is set to 30 minutes.
All event categories are enabled.
n
To change or disable the heartbeat interval, or to disable event categories, and to perform other log
configuration:

WebUI
1. Log into the IX14 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
IX14 User Guide
Configure options for the event and system logs
679