Configure Quality Of Service Options - Digi IX14 User Manual

Hide thumbs Also See for IX14:

Table of Contents

7. Click Apply to save the configuration and apply the change.

Command line

1. Log into the IX14 command line as a user with full Admin access rights.

Depending on your device configuration, you may be presented with an Access selection

menu. Type admin to access the Admin CLI.

2. At the command line, type config to enter configuration mode:

3. Enable custom firewall rules:

(config)> firewall custom enable true

4. (Optional) Instruct the device to override all preconfigured firewall behavior and rely solely on

the custom firewall rules:

(config)> firewall custom override true

5. Set the shell command that will execute the custom firewall rules script:

(config)> firewall custom rules "shell-command"

6. Save the configuration and apply the change:

(config)> save

Configuration saved.

7. Type exit to exit the Admin CLI.

Depending on your device configuration, you may be presented with an Access selection

menu. Type quit to disconnect from the device.

Configure Quality of Service options

Quality of Service (QoS) options allow you to manage the traffic performance of various services, such

as Voice over IP (VoIP), cloud computing, traffic shaping, traffic prioritizing, and bandwidth allocation.

When configuring QOS, you can only control the queue for outgoing packets on each interface (egress

packets), not what is received on the interface (packet ingress).

A QoS binding contains the policies and rules that apply to packets exiting the IX14 device on the

binding's interface. By default, the IX14 device has two preconfigured QoS bindings, Outbound and

Inbound. These bindings are an example configuration designed for a typical VoIP site:

IX14 User Guide

Configure Quality of Service options