Digi IX14 User Manual page 86

Hide thumbs Also See for IX14:

Table of Contents

1. Log into the IX14 WebUI as a user with full Admin access rights.

2. On the menu, click System. Under Configuration, click Device Configuration.

The Configuration window is displayed.

3. Click Network > Interfaces.

4. Select the appropriate WAN or WWAN on which SureLink should be disabled..

5. After selecting the WAN or WWAN, click IPv4 > SureLink.

6. Click to expand Test targets.

7. Click to expand the second test target. This test target has its Test type set to Test DNS

servers configured for this interface.

IX14 User Guide

Wireless Wide Area Networks (WWANs)