Digi IX14 User Manual page 62

Initial configuration
1. Log into the IX14 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Services > Bluetooth.
4. Enable or disable the Bluetooth service as needed.
5. Click Apply to save the configuration and apply the change.

Command line
1. Log into the IX14 command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. Enable or disable the Bluetooth service:
To enable the Bluetooth service:
n
(config)> service bluetooth enable true
(config)>
IX14 User Guide
Enable or disable Bluetooth service
62