Change The Access Rights For A Predefined Group - Digi IX14 User Manual

User authentication
Add an authentication group
Delete an authentication group

Change the access rights for a predefined group

By default, two authentication groups are predefined: admin and serial. To change the access rights
of the predefined groups:

WebUI
1. Log into the IX14 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Authentication > Groups.
4. Click the authentication group to be changed, either admin or serial, to expand its
configuration node.
5. Click the box next to the following options, as appropriate, to enable or disable access rights
for each:
Admin access
n
For groups assigned Admin access, you can also determine whether the Access level
should be Full access or Read-only access.
l
l
The default is Full access.
Interactive shell access
n
IX14 User Guide
Full access provides users of this group with the ability to manage the IX14 device
by using the WebUI or the Admin CLI.
Read-only access provides users of this group with read-only access to the WebUI
and Admin CLI.
Authentication groups
185
189
183