Digi IX14 User Manual page 325

Hide thumbs Also See for IX14:

Table of Contents

a. Generate the SSL certificate and private key, for example:

# openssl req -newkey rsa:2048 -nodes -keyout key.pem -x509 -days 365

-out certificate.pem

b. Paste the contents of certificate.pem and key.pem into the SSL certificate field. The

contents of the certificate.pem must be first. For example:

8. For Allow legacy encryption protocols, enable this option to allow clients to connect to the

HTTPS session by using encryption protocols older than TLS 1.2, in addition to TLS 1.2 and

later protocols. This option is disabled by default, which means that only TLS 1.2 and later

encryption protocols are allowed with HTTPS connections.

9. View is set to Auto by default and normally should not be changed.

10. Legacy port redirection is used to redirect client HTTP requests to the HTTPS service. Legacy

port redirection is enabled by default, and normally these settings should not be changed. To

disable legacy port redirection, click to expand Legacy port redirection and deselect Enable.

11. Click Apply to save the configuration and apply the change.

Command line

1. Log into the IX14 command line as a user with full Admin access rights.

Depending on your device configuration, you may be presented with an Access selection

menu. Type admin to access the Admin CLI.

IX14 User Guide

Password-protected certificate keys are not supported.

Configure the web administration service