Start A Manual Script - Digi IX14 User Manual

Applications
12. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.

Start a manual script

You can start a script that is enabled and configured to have a run mode of Manual. See

WebUI
1. Log into the IX14 WebUI as a user with Admin access.
2. At the Status page, click Scripts.
The Scripts page displays:
3. For scripts that are enabled and configured to have a run mode of Manual, click Start Script
to start the script.

Command line
1. Log into the IX14 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Determine the name of scripts that are currently running:
> show scripts
Index
-----
0
1
>
3. Start the script:
)> system script start script1
>
IX14 User Guide
Label Enabled
----------- -------
script1 true
script2 true
Status Run time
------ --------
active
idle 01:00
Start a manual script
458