Digi IX14 User Manual page 371

Services
9. For Forward interval multiplier, select the number of Location update intervals to wait
before forwarding location data to this server. See
information about setting the Location update interval.
10. For NMEA filters, select the filters that represent the types of messages that will be forwarded.
By default, all message types are forwarded.
To remove a filter:
n
a. Click the down arrow () next to the appropriate message type.
b. Click Delete.
To add a message type:
n
a. For Add NMEA filter or Add TAIP filter, click .
b. Select the filter type. Allowed values are:
11. For TAIP filters, select the filters that represent the types of messages that will be forwarded.
By default, all message types are forwarded.
To remove a filter:
n
a. Click the down arrow () next to the appropriate message type.
b. Click Delete.
To add a message type:
n
a. For Add NMEA filter or Add TAIP filter, click .
b. Select the filter type. Allowed values are:
12. For Outgoing message type, select either NMEA or TAIP for the type of message that the
device will forward to a remote host.
(Optional) If NMEA is selected, select a Talker ID.
n
The talker ID is a two-character prefix in the NMEA message that identifies the source
type. The talker ID set here will override the talker ID from all sources, and all
forwarded sentences will use the configured ID. The default setting is Default, which
means that the talker ID provided by the source will be used.
13. (Optional) For Prepend text, enter text to prepend to the forwarded message. Two variables
can be included in the prepended text:
IX14 User Guide
GGA: Reports time, position, and fix related data.
l
GLL: Reports position data: position fix, time of position fix, and status.
l
GSA: Reports GPS DOP and active satellites.
l
GSV: Reports the number of SVs in view, PRN, elevation, azimuth, and SNR.
l
RMC: Reports position, velocity, and time.
l
VTG: Reports direction and speed over ground.
l
AL: Reports altitude and vertical velocity.
l
CP: Compact position: reports time, latitude, and longitude.
l
ID: Reports the vehicle ID.
l
LN: Long navigation: reports the latitude, longitude, and altitude, the horizontal
l
and vertical speed, and heading.
PV: Position/velocity: reports the latitude, longitude, and heading.
l
Location information
Configure the location service for more
371