Show Vrrp Status And Statistics - Digi IX14 User Manual

Hide thumbs Also See for IX14:

Table of Contents

3. Set the DHCP server gateway type to custom:

(config)> network interface LAN ipv4 dhcp_server advanced gateway custom

4. Set the custom gateway to 192.168.3.3:

(config)> network interface LAN ipv4 dhcp_server advanced gateway_custom

5. Save the configuration and apply the change:

(config)> save

Configuration saved.

6. Type exit to exit the Admin CLI.

Depending on your device configuration, you may be presented with an Access selection

menu. Type quit to disconnect from the device.

Show VRRP status and statistics

This section describes how to display VRRP status and statistics for a IX14 device. VRRP status is

available from the Web UI only.

1. Log into the IX14 WebUI as a user with full Admin access rights.

2. On the menu, click System. Under Configuration, click Device Configuration.

The Configuration window is displayed.

IX14 User Guide

Virtual Router Redundancy Protocol (VRRP)