Digi IX14 User Manual page 221

Hide thumbs Also See for IX14:

Table of Contents

User authentication

1. Log into the IX14 WebUI as a user with full Admin access rights.

2. On the menu, click System. Under Configuration, click Device Configuration.

The Configuration window is displayed.

3. Click Authentication > LDAP > Servers.

4. Add LDAP servers:

a. For Add server, click .

b. For Hostname, type the hostname or IP address of the LDAP server.

c. (Optional) Change the default Port setting to the appropriate port. Normally this should

be left at the default setting of port 389 for non-TLS and 636 for TLS.

d. (Optional) Click  again to add additional LDAP servers.

5. (Optional) Enable Authoritative to prevent other authentication methods from being used if

LDAP authentication fails. Other authentication methods will only be used if the LDAP server is

unavailable.

IX14 User Guide