Digi IX14 User Manual page 248

Firewall
A white list of devices, based on either IP address or firewall zone, that are authorized to
n
leverage this forwarding rule.
To configure a port forwarding rule:

WebUI
1. Log into the IX14 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Firewall > Port forwarding.
4. For Add port forward, click .
The port forwarding rule configuration window is displayed.
Port forwarding rules are enabled by default. To disable, click to toggle off Enable.
5. (Optional) Type a Label that will be used to identify the rule.
IX14 User Guide
Port forwarding rules
248