Digi IX14 User Manual page 68

Interfaces
5. Fifth SureLink failure: The device will switch to the alternate SIM.
Note The Switch SIM behavior only applies if the modem is connected, but SureLink tests are
failing. If the modem is not connected, SIM failover applies. See
Area Network (WWAN)
6. Sixth SureLink failure: The interface will restart again.
7. Seventh Surelink failure: The device will reboot.
To configure the IX14 device to regularly probe connections through the WWAN:

WebUI
SureLink can be configured for both IPv4 and IPv6.
1. Log into the IX14 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Interfaces.
4. Create a new WWAN or select an existing one:
To create a new WWAN, see
n
To edit an existing WWAN, click to expand the appropriate WWAN.
n
IX14 User Guide
for more information about the SIM failover option.
Configure a Wireless Wide Area Network
Wireless Wide Area Networks (WWANs)
Configure a Wireless Wide
(WWAN).
68