Digi IX14 User Manual page 97

Interfaces
RX bytes
Uptime
SIM
---
SIM Slot
SIM Status
IMSI
ICCID
SIM Provider
4G
--
RSRQ
RSRP
RSSI
SNR
>
Unlock a SIM card
A SIM card can be locked if a user tries to set an invalid PIN for the SIM card too many times. In
addition, some cellular carriers require a SIM PIN to be added before the SIM card can be used. If the
SIM card is locked, the IX14 device cannot make a cellular connection.

Command line
To unlock a SIM card:
1. Log into the IX14 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the Admin CLI prompt, use the
card:
> modem puk unlock puk_code new_pin modem_name
>
For example, to unlock a SIM card in the modem named modem with PUK code 12345678,
and set the new SIM PIN to 1234:
> modem puk unlock 12345678 1234 modem
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Note If the SIM remains in a locked state after using the unlock command, contact your cellular
carrier.
IX14 User Guide
Wireless Wide Area Networks (WWANs)
: 61026
: 10 hrs, 56 mins (39360s)
: 1
: ready
: 61582122197895
: 26587628655003992180
: AT&T
: Good (-11.0 dB)
: Good (-93.0 dBm)
: Excellent (-64.0 dBm)
: Good (6.4 dB)
modem puk unlock command to set a new PIN for the SIM
97