Digi IX14 User Manual page 279

System administration
The location of the device.
n
A description of the device.
n
A banner that will be displayed when users access terminal services on the device.
n
To enter system information:

WebUI
1. Log into the IX14 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click System.
4. For Name, type a name for the device. This name will appear in log messages and at the
command prompt.
5. For Contact, type the name of a contact for the device.
6. For Location, type the location of the device.
7. For Banner, type a banner message that will be displayed when users log into terminal
services on the device.
8. Click Apply to save the configuration and apply the change.

Command line
IX14 User Guide
Configure system information
279