Digi IX14 User Manual page 591

Virtual Private Networks (VPN)
Repeat this step to list additional interfaces.
To limit access based on firewall zones:
n
(config vpn openvpn server name)> add acl zone end value
Where value is a firewall zone defined on your device, or the any keyword.
Repeat this step to list additional firewall zones.
9. (Optional) Set additional OpenVPN parameters.
a. Enable the use of additional OpenVPN parameters:
(config vpn openvpn server name)> advanced_options enable true
(config vpn openvpn server name)>
b. Configure whether the additional OpenVPN parameters should override default options:
(config vpn openvpn server name)> advanced_options override true
(config vpn openvpn server name)>
IX14 User Guide
defaultip
defaultlinklocal
lan
loopback
modem
config vpn openvpn server name)>
Display a list of available firewall zones:
Type ... firewall zone ? at the config prompt:
(config vpn openvpn server name)> ... firewall zone ?
Zones: A list of groups of network interfaces that can be
referred to by packet
filtering rules and access control lists.
Additional Configuration
--------------------------------------------------------
-----------------------
any
dynamic_routes
edge
external
internal
ipsec
loopback
setup
(config vpn openvpn server name)>
Default IP
Default Link-local IP
LAN
Loopback
Modem
OpenVPN
591