Firewall
3. Click Network > Interfaces > LAN.
4. For Zone, select External.
5. Click Apply to save the configuration and apply the change.
Command line
1. Log into the IX14 command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. At the config prompt, type:
(config)> network interface LAN zone my_zone
(config)>
IX14 User Guide
Firewall configuration
245