Digi IX14 User Manual page 284

System administration
> scp host hostname-or-ip user username remote remote-path local local-
path to local
where:
hostname-or-ip is the hostname or ip address of the remote host.
n
username is the name of the user on the remote host.
n
remote-path is the path and filename of the file on the remote host that will be copied
n
to the IX14 device.
local-path is the location on the IX14 device where the copied file will be placed.
n
For example:
> scp host 192.168.4.1 user admin remote /home/admin/bin/IX14-
22.2.9.85.bin local /etc/config/ to local
admin@192.168.4.1's password: adminpwd
IX14-22.2.9.85.bin
>
4. Verify that the firmware file has been successfully uploaded to the device:
> ls /etc/config/scripts
-rw-r--r--
22.2.9.85.bin
-rw-r--r--
...
>
5. Update the firmware by entering the
firmware file name:
> system firmware update file IX14-22.2.9.85.bin
36632K
netflash: got "/etc/config/IX14-22.2.9.85.bin", length=37511229
netflash: authentication successful
netflash: programming FLASH device /dev/flash/image
36633K 100%
Firmware update completed, reboot device
>
6. Reboot the device to run the new firmware image using the
> reboot
Rebooting system
>
7. Once the device has rebooted, log into the IX14's command line as a user with Admin access
and verify the running firmware version by entering the
> show system
Hostname
FW Version
MAC
IX14 User Guide
1 root root
1 root root
system firmware update
: IX14
: 22.2.9.85
: 0040FF800120
Update system firmware
100% 36MB
37511229 May 16 20:10 IX14-
2580 May 16 16:44 accns.json
command, specifying the
reboot command.
show system command.
11.1MB/s 00:03
284