Add A Device To Digi Remote Manager; View Digi Remote Manager Connection Status - Digi IX14 User Manual

Hide thumbs Also See for IX14:

Table of Contents

Central management

Add a device to Digi Remote Manager

1. If you have not already done so, connect to your Digi Remote Manager account.

2. Click Device Management to display a list of your devices.

3. Click Add Devices.

4. Select MAC Address and enter the Ethernet MAC address for your device.

5. For Install Code, enter the default password on the printed label packaged with your device.

The same default password is also shown on the label affixed to the bottom of the device.

6. Click Add.

7. Click OK.

Digi Remote Manager adds your IX14 device to your account and it appears in the Device

Management view.

To view the current Digi Remote Manager configuration:

1. Log into the IX14 WebUI as a user with Admin access.

2. The dashboard includes a Digi Remote Manager status pane:

Command line

1. Log into the IX14 command line as a user with full Admin access rights.

Depending on your device configuration, you may be presented with an Access selection

menu. Type admin to access the Admin CLI.

2. At the command line, type config to enter configuration mode:

IX14 User Guide

Add a device to Digi Remote Manager