Virtual Private Networks (VPN)
1. Log into the IX14 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click VPN > IPsec.
4. Create a new IPsec tunnel or select an existing one:
To create a new IPsec tunnel, see
n
To edit an existing IPsec tunnel, click to expand the appropriate tunnel.
n
5. After creating or selecting the IPsec tunnel, click Active recovery.
6. Enable active recovery.
IX14 User Guide
Configure an IPsec
tunnel.
IPsec
561