Digi IX14 User Manual page 96

Interfaces
1. Log into the IX14 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. Use the show modem
To view a status summary for the modem:
n
> show modem
Modem
-----
modem
>
To view detailed status and statistics, use the
n
> show modem name modem
modem: [Telit] LM940
-------------------------------------------------------------------
-----------
IMEI
Model
FW Version
Revision
Status
------
State
Signal Strength
Bars
Access Mode
Network Technology (CNTI): LTE
Band
Temperature
wwan1 Interface
---------------
APN
IPv4 surelink
IPv4 address
IPv4 gateway
IPv4 MTU
IPv4 DNS server(s)
IPv6 surelink
IPv6 address
IPv6 gateway
IPv6 MTU
TX bytes
IX14 User Guide
command:
SIM Status
------------- ---------
1 (ready) connected
: 781154796325698
: LM940
: 24.01.541_ATT
: 24.01.541
: connected
: Good (-85 dBm)
: 2/5
: 4G
: B2
: 34C
: 1234
: passing
: 189.232.229.47
: 189.232.229.1
: 1500
: 245.144.162.207, 245.144.162.208
: passing
: 11f6:4680:0d67:59d2:552b:3429:81a8:f1ea
: ff50:d95d:7e98:abe8:3030:9138:4f25:f51b
: 1500
: 127941
Wireless Wide Area Networks (WWANs)
APN Signal Strength
--------- --------------------
1234 Good (-84 dBm)
show modem name name command:
96