Digi IX14 User Manual page 125

Interfaces
i. Set the MTU:
(config network interface my_lan)> ipv4 mtu num
(config network interface my_lan)>
c. Enable the DHCP server:
(config network interface my_lan)> ipv4 dhcp_server enable true
See DHCP servers
7. (Optional) Configure IPv6 settings:
a. Enable IPv6 support:
(config network interface my_lan)> ipv6 enable true
(config network interface my_lan)>
b. Set the IPv6 type to DHCP:
(config network interface my_lan)> ipv6 type dhcpv6
(config network interface my_lan)>
c. Generally, the default settings for IPv6 support are sufficient. You can view the default IPv6
settings by using the question mark (?):
(config network interface my_lan)> ipv6 ?
IPv6
Parameters
---------------------------------------------------------------------
----------
enable
metric
mgmt
mtu
prefix_id
prefix_length
type
weight
Additional Configuration
---------------------------------------------------------------------
----------
connection_monitor
dhcpv6_server
(config network interface my_lan)>
View default settings for the IPv6 DHCP server:
(config network interface my_lan)> ipv6 dhcpv6_server ?
IX14 User Guide
for information about configuring the DHCP server.
Current Value
true
0
0
1500
1
48
prefix_delegation
10
Active recovery
DHCPv6 server
Local Area Networks (LANs)
Enable
Metric
Management priority
MTU
Prefix ID
Prefix length
Type
Weight
125