Show Wwan Status And Statistics - Digi IX14 User Manual

Interfaces
c. Configure when the WWAN's DNS servers will be used:
(config network interface my_wwan)> ipv4
(config network interface my_wwan)>
Where value is one of:
n
n
n
The default setting is primary.
15. Optional IPv6 configuration items:
a. IPv6 support is enabled by default. To disable:
(config network interface my_wwan)> ipv4 enable false
(config network interface my_wwan)>
b. Set the MTU:
(config network interface my_wwan)> ipv4 mtu num
(config network interface my_wwan)>
c. Configure when the WWAN's DNS servers will be used:
(config network interface my_wwan)> ipv4
(config network interface my_wwan)>
Where value is one of:
n
n
n
The default setting is primary.
d. See Configure SureLink active recovery to detect modem failures
configuring active recovery.

Show WWAN status and statistics


WebUI
1. Log into the IX14 WebUI as a user with Admin access.
2. From the menu, click Status.
3. Under Networking, click Interfaces.
IX14 User Guide
always: DNS will always be used for this WWAN; when multiple interfaces have the
same DNS server, the interface with the lowest metric will be used for DNS
requests.
never: Never use DNS servers for this WWAN.
primary: Only use the DNS servers provided for this WWAN when the WWAN is the
primary route.
always: DNS will always be used for this WWAN; when multiple interfaces have the
same DNS server, the interface with the lowest metric will be used for DNS
requests.
never: Never use DNS servers for this WWAN.
primary: Only use the DNS servers provided for this WWAN when the WWAN is the
primary route.
Wireless Wide Area Networks (WWANs)
dns value
dns value
for information about
114