Exit The Command Line Interface - Digi IX14 User Manual

Configuration and management
The default user is root:
n
l
l
The default user is admin:
n
l
l
login: admin
Password: **********
3. Depending on the device configuration, you may be presented with another menu, for
example:
Access selection menu:
Select access or quit [admin] :
Type a or admin to access the IX14 command line.
You will now be connected to the Admin CLI:
Connecting now, 'exit' to disconnect from Admin CLI ...
>
See Command line interface

Exit the command line interface


Command line
1. At the command prompt, type exit.
> exit
2. Depending on the device configuration, you may be presented with another menu, for
example:
Access selection menu:
Select access or quit [admin] :
IX14 User Guide
If the device is at a firmware level 19.8.x or older.
If the device has been upgraded from 19.8.x or older to 19.11.x or newer.
If the device is at 19.11.x or newer when manufactured.
If the device has been upgraded from 19.8.x or older to 19.11.x or newer and has
been factory reset after the upgrade.
a: Admin CLI
s: Shell
q: Quit
for detailed instructions on using the command line interface
a: Admin CLI
s: Shell
q: Quit
Exit the command line interface
44