Digi IX14 User Manual page 77

Interfaces

WebUI
SureLink can be configured for both IPv4 and IPv6.
1. Log into the IX14 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Network > Interfaces.
4. Create a new interface or select an existing one:
To create a new interface, see
n
To edit an existing interface, click to expand the appropriate interface.
n
5. After creating or selecting the interface, click IPv4 (or IPv6) > SureLink.
6. Enable SureLink.
SureLink can be enabled for both IPv4 and IPv6 configurations. By default, SureLink is enabled
for IPv4 for the preconfigured WWAN (Modem). It is disabled for IPv6.
IX14 User Guide
Wireless Wide Area Networks (WWANs)
Configure a Wireless Wide Area Network (WWAN).
77