Delete A File Or Directory - Digi IX14 User Manual

File system

Delete a file or directory

To delete a file or directory by using the WebUI or the Admin CLI:

WebUI
1. Log into the IX14 WebUI as a user with Admin access.
2. On the menu, click System. Under Administration, click File System.
The File System page appears.
3. Highlight the directory containing the file to be deleted and click  to open the directory.
4. Highlight the file to be deleted and click .
5. Click OK to confirm.

Command line
To delete a file named test.py in /etc/config/scripts:
1. Log into the IX14 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the Admin CLI prompt, type:
> rm /etc/config/scripts/test.py
rm: remove '/etc/config/scripts/test.py'? yes
>
3. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
To delete a directory named temp from /opt:
1. Log into the IX14 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
IX14 User Guide
Delete a file or directory
762