Use Digidevice Runtime To Access The Runtime Database - Digi IX14 User Manual

Applications
register(target:str, response_callback:Callable[[str, str], str],
status_callback:Callable[[int, str], NoneType]=None, xml_
encoding:str='UTF-8')
...
Use the help command with device_request.unregister:
n
>>> help(device_request.unregister)
Help on function unregister in module digidevice.device_request:
unregister(target:str) -> bool
...
5. Use Ctrl-D to exit the Python session. You can also exit the session using exit() or quit().

Use digidevice runtime to access the runtime database

Use the runt submodule to access and modify the device runtime database.
Read from the runtime database
Use the keys() and get() methods to read the device configuration:
1. Log into the IX14 command line as a user with shell access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type shell to access the device shell.
2. At the shell prompt, use the python command with no parameters to enter an interactive
Python session:
# python
Python 3.6.13 (default, May
[GCC 8.3.0] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>>
3. Import the runt submodule:
>>> from digidevice import runt
>>>
4. Use the start() method to open the runtime database:
>>> runt.start()
>>>
5. Use the keys() method to display available keys in the runtime database, and use the get()
method to print information from the runtime database:
a. Print available keys:
>>> print(runt.keys(""))
IX14 User Guide
9 2021, 22:49:59)
Digidevice module
480