Create A Virtual Lan (Vlan) Route - Digi IX14 User Manual

System administration
Gateway: 192.168.210.1
n
2. Connect the PC's Ethernet port to the Ethernet port on your IX14 device.
3. Open a telnet session and connect to the IX14 device at the IP address of 192.168.210.1.
4. Log into the device:
Username: admin
n
Password: The default unique password for your device is printed on the device label.
n
5. At the shell prompt, type:
# rm /etc/config/.nocrypt
# flatfsd -i
This will re-enable encryption and leave the device at its factory default setting.

Create a Virtual LAN (VLAN) route

Virtual LANs (VLANs) allow splitting a single physical LAN into separate Virtual LANs. This is useful for
security reasons, and also helps to reduce broadcast traffic on the LAN.
IX14 User Guide
Create a Virtual LAN (VLAN) route
311