Crankshaft Removal - BRP Evinrude E-TEC G2 Service Manual

Use an appropriate ring expander to remove all
piston rings from pistons. Discard the rings.
WARNING
Wear safety glasses to avoid injury.
Remove wrist pin retaining rings. Discard retaining
rings.
Use Wrist Pin Pressing Tool, P/N 396747, to
remove wrist pin.
1. Driver, P/N 396747

Crankshaft Removal

Wear safety glasses to avoid injury.
Carefully lift crankshaft straight up and remove
from crankcase.
009691
Remove upper seal from crankshaft. Discard the
seal. A new upper seal must be installed on
assembly.
009682
Remove the upper crankshaft bearing.
009683
Powerhead
Powerhead Disassembly
WARNING
009690
009671
11
009672
247