Service Specifications - BRP Evinrude E-TEC G2 Service Manual

Reference Information

Service Specifications

Service Specifications
HP
Engine
Full Throttle Operating Range
Power
Idle RPM in NEUTRAL
Idle RPM in Gear
Weight
(may vary depending on model)
Lubricant – Preferred Lubricant
–Acceptable Lubricant
Engine Type
Displacement
Bore
Stroke
Standard Bore
Top Crankshaft Journal
Center Crankshaft Journals
Bottom Crankshaft Journal
Rod Crankpin
Piston Ring End Gap, Both
12
200
5400-6000
RPM
200 HP
(147.1 kw)
@ 5500 RPM
Evinrude XD100 , Evinrude XD50
Synthetic TC-W3 NMMA -certified oil
Capacity 2.0 gallons (7.5 liters)
74° V 6-Cylinder Loop-Charged
210 cu. in. (3.4 L, 3441 cm
3.854 in. (97.89 mm)
3.000 in. (76 mm)
3.8535 to 3.8550 in. (97.87 to 97.90 mm)
To bore oversize, add piston oversize dimension to standard bore
1.6199 to 1.6204 in. (41.15 to 41.16 mm)
2.1870 to 2.1875 in. (55.55 to 55.56 mm)
1.5747 to 1.5752 in. (40.0 to 40.01 mm)
1.4995 to 1.5000 in. (38.09 to 38.106 mm)
0.022 to 0.028 in. (0.57 to 0.72 mm)
225 250
5400-6000 5400-6000
RPM RPM
225 HP 250 HP
(165.5 kw) (183.9 kw)
@ 5500 RPM @ 5500 RPM
500 ± 50 RPM
500 ± 50 RPM
20 in. (L) Models 537 lbs. (244 kg)
25 in. (X) Models 558 lbs. (253 kg)
30 in. (Z) Models 570 lbs. (259 kg)
3
)
250 H.O. 300
5400-6000 5400-6000
RPM RPM
250 HP 300 HP
(183.9 kw) (220.6 kw)
@ 5750 RPM @ 5750 RPM